View MC10E131FNR2_896789.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MC10E131, MC100E131 5V ECL 4-Bit D Flip-Flop
Description
The MC10E/100E131 is a quad master-slave D-type flip-flop with differential outputs. Each flip-flop may be clocked separately by holding Common Clock (CC) LOW and using the Clock Enable (CE) inputs for clocking. Common clocking is achieved by holding the CE inputs LOW and using CC to clock all four flip-flops. In this case, the CE inputs perform the function of controlling the common clock, to each flip-flop. Individual asynchronous resets are provided (R). Asynchronous set controls (S) are ganged together in pairs, with the pairing chosen to reflect physical chip symmetry. Data enters the master when both CC and CE are LOW, and transfers to the slave when either CC or CE (or both) go HIGH. The 100 Series contains temperature compensation.
Features
http://onsemi.com
PLCC-28 FN SUFFIX CASE 776
* * * * * * * * * * * *
* * *
1100 MHz Min. Toggle Frequency Differential Outputs Individual and Common Clocks Individual Resets (asynchronous) Paired Sets (asynchronous) PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V Metastability Time Constant is 200 ps. Internal Input 50 kW Pulldown Resistors ESD Protection: Human Body Model; > 2 kV, Machine Model; > 200 V Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Moisture Sensitivity Level: Pb = 1 Pb-Free = 3 For Additional Information, see Application Note AND8003/D Flammability Rating: UL 94 V-0 @ 0.125 in, Oxygen Index: 28 to 34 Transistor Count = 240 devices Pb-Free Packages are Available*
MARKING DIAGRAM*
1
MCxxxE131G AWLYYWW
xxx A WL YY WW G
= 10 or 100 = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package
*For additional marking information, refer to Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
(c) Semiconductor Components Industries, LLC, 2006
November, 2006 - Rev. 11
1
Publication Order Number: MC10E131/D
MC10E131, MC100E131
S
D3 CE3 R3 25 CE3 D3 S12 VEE CC S03 D0 26 27 28 1 2 3 4 5 CE0 6 R0 7 D1 8 CE1 9 R1 10 NC 11 VCCO D2 24 CE2 23 R2 22 VCCO Q3 21 20 Q3 19 18 17 16 Q2 Q2 VCC Q1 Q1 Q0 Q0 S03 S12 CC D2 CE2 R3
D
Q Q
Q3 Q3
R
D
S
Q Q
Q2 Q2
R R2
Pinout: 28-Lead PLCC (Top View)
15 14 13 12
R1 CE1 D1 D
R
Q Q
Q1 Q1
S
R0 CE0 D0 D
R
Q Q
Q0 Q0
* All VCC and VCCO pins are tied together on the die. Warning: All VCC, VCCO, and VEE pins must be externally connected to Power Supply to guarantee proper operation.
S
Figure 1. Pinout Diagram
Figure 2. Logic Diagram
Table 1. PIN DESCRIPTION
PIN D0 - D3 CE0 - CE3 R0 - R3 CC S03, S12 Q0 - Q3, Q0 - Q3 VCC, VCCO VEE NC FUNCTION ECL Data Inputs ECL Clock Enables (Individual) ECL Resets ECL Common Clock ECL Sets (paired) ECL Differential Outputs Positive Supply Negative Supply No Connect
http://onsemi.com
2
MC10E131, MC100E131
Table 2. MAXIMUM RATINGS
Symbol VCC VEE VI Iout TA Tstg qJA qJC Tsol Parameter PECL Mode Power Supply NECL Mode Power Supply PECL Mode Input Voltage NECL Mode Input Voltage Output Current Operating Temperature Range Storage Temperature Range Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Wave Solder Pb Pb-Free 0 lfpm 500 lfpm Standard Board PLCC-28 PLCC-28 PLCC-28 Condition 1 VEE = 0 V VCC = 0 V VEE = 0 V VCC = 0 V Continuous Surge VI v VCC VI w VEE Condition 2 Rating 8 -8 6 -6 50 100 0 to +85 -65 to +150 63.5 43.5 22 to 26 265 265 Unit V V V V mA mA C C C/W C/W C/W C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Table 3. 10E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V (Note 1)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current Output HIGH Voltage (Note 2) Output LOW Voltage (Note 2) Input HIGH Voltage Input LOW Voltage Input HIGH Current CC S R, CE D 350 450 300 150 0.5 0.3 Min Typ 58 Max 70 3980 3050 3830 3050 Min 0C Typ 58 4070 3210 3995 3285 Max 70 4160 3370 4160 3520 350 450 300 150 0.5 0.25 4020 3050 3870 3050 Min 25C Typ 58 4105 3210 4030 3285 Max 70 4190 3370 4190 3520 350 450 300 150 0.3 0.2 4090 3050 3940 3050 Min 85C Typ 58 4185 3227 4110 3302 Max 70 4280 3405 4280 3555 350 450 300 150 Unit mA mV mV mV mV mA
IIL
Input LOW Current
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. Input and output parameters vary 1:1 with VCC. VEE can vary -0.46 V / +0.06 V. 2. Outputs are terminated through a 50 W resistor to VCC - 2.0 V.
http://onsemi.com
3
MC10E131, MC100E131
Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = -5.0 V (Note 3)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current Output HIGH Voltage (Note 4) Output LOW Voltage (Note 4) Input HIGH Voltage Input LOW Voltage Input HIGH Current CC S R, CE D Input LOW Current 350 450 300 150 0.5 0.3 Min Typ 58 Max 70 -1020 -1950 -1170 -1950 Min 0C Typ 58 -930 -1790 -1005 -1715 Max 70 -840 -1630 -840 -1480 350 450 300 150 0.5 0.065 -980 -1950 -1130 -1950 Min 25C Typ 58 -895 -1790 -970 -1715 Max 70 -810 -1630 -810 -1480 350 450 300 150 0.3 0.2 -910 -1950 -1060 -1950 Min 85C Typ 58 -815 -1773 -890 -1698 Max 70 -720 -1595 -720 -1445 350 450 300 150 Unit mA mV mV mV mV mA
IIL
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. Input and output parameters vary 1:1 with VCC. VEE can vary -0.46 V / +0.06 V. 4. Outputs are terminated through a 50 W resistor to VCC - 2.0 V.
Table 5. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V (Note 5)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current Output HIGH Voltage (Note 6) Output LOW Voltage (Note 6) Input HIGH Voltage Input LOW Voltage Input HIGH Current CC S R, CE D 3975 3355 350 450 300 150 0.5 0.3 Min Typ 58 Max 70 3975 3190 3835 3190 Min 0C Typ 58 4050 3295 3975 3355 Max 70 4120 3380 4120 3525 350 450 300 150 0.5 0.25 3975 3190 3835 3190 Min 25C Typ 58 4050 3255 3975 3355 Max 70 4120 3380 4120 3525 350 450 300 150 0.5 0.2 3975 3190 3835 3190 Min 85C Typ 67 4050 3260 3975 3355 Max 81 4120 3380 4120 3525 350 450 300 150 Unit mA mV mV mV mV mA
IIL
Input LOW Current
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 5. Input and output parameters vary 1:1 with VCC. VEE can vary -0.46 V / +0.8 V. 6. Outputs are terminated through a 50 W resistor to VCC - 2.0 V.
http://onsemi.com
4
MC10E131, MC100E131
Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = -5.0 V (Note 7)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current Output HIGH Voltage (Note 8) Output LOW Voltage (Note 8) Input HIGH Voltage Input LOW Voltage Input HIGH Current CC S R, CE D Input LOW Current -1025 -1645 Min Typ 58 Max 70 -1025 -1810 -1165 -1810 Min 0C Typ 58 -950 -1705 -1025 -1645 Max 70 -880 -1620 -880 -1475 -1025 -1810 -1165 -1810 Min 25C Typ 58 -950 -1745 -1025 -1645 Max 70 -880 -1620 -880 -1475 -1025 -1810 -1165 -1810 Min 85C Typ 67 -950 -1740 -1025 -1645 Max 81 -880 -1620 -880 -1475 Unit mA mV mV mV mV mA 350 450 300 150 0.5 0.3 350 450 300 150 0.5 0.25 350 450 300 150 0.5 0.2 350 450 300 150 mA
IIL
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 7. Input and output parameters vary 1:1 with VCC. VEE can vary -0.46 V / +0.8 V. 8. Outputs are terminated through a 50 W resistor to VCC - 2.0 V.
Table 7. AC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = -5.0 V (Note 7)
-40C Symbol fMAX tPLH tPHL Characteristic Maximum Toggle Frequency Propagation Delay to Output CC R S Setup Time (Note 10) Hold Time (Note 10) Reset Recovery Time Minimum Pulse Width R, S Within-Device Skew (Note 11) Random Clock Jitter Rise/Fall Time (20-80%) 275 CLK CE Min 1100 310 275 400 300 200 225 450 400 400 60 <1 460 725 300 Typ 1400 600 600 635 550 20 -20 150 750 725 875 775 Max Min 1100 360 325 450 350 150 175 400 400 400 60 <1 480 300 25C Typ 1400 500 500 640 550 20 -20 150 700 675 825 725 Max Min 1100 360 325 450 350 150 175 400 400 400 60 <1 480 675 85C Typ 1400 500 500 640 550 20 -20 150 700 675 825 725 Max Unit MHz ps
tS tH tRR tPW tSKEW
tJITTER
D D
ps ps ps ps ps ps ps
tr/tf
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 9. 10 Series: VEE can vary -0.46 V / +0.06 V. 100 Series: VEE can vary -0.46 V / +0.8 V. 10. Setup/hold times guaranteed for both CC and CE. 11. Within-device skew is defined as identical transitions on similar paths through a device.
http://onsemi.com
5
MC10E131, MC100E131
Q Driver Device Q Zo = 50 W 50 W 50 W D Zo = 50 W D Receiver Device
VTT VTT = VCC - 2.0 V
Figure 3. Typical Termination for Output Driver and Device Evaluation (See Application Note AND8020/D - Termination of ECL Logic Devices.)
ORDERING INFORMATION
Device MC10E131FN MC10E131FNG MC10E131FNR2 MC10E131FNR2G MC100E131FN MC100E131FNG MC100E131FNR2 MC100E131FNR2G Package PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) PLCC-28 PLCC-28 (Pb-Free) Shipping 37 Units / Rail 37 Units / Rail 500 / Tape & Reel 500 / Tape & Reel 37 Units / Rail 37 Units / Rail 500 / Tape & Reel 500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D AN1406/D AN1503/D AN1504/D AN1568/D AN1672/D AND8001/D AND8002/D AND8020/D AND8066/D AND8090/D - ECL Clock Distribution Techniques - Designing with PECL (ECL at +5.0 V) - ECLinPSt I/O SPiCE Modeling Kit - Metastability and the ECLinPS Family - Interfacing Between LVDS and ECL - The ECL Translator Guide - Odd Number Counters Design - Marking and Date Codes - Termination of ECL Logic Devices - Interfacing with ECLinPS - AC Characteristics of ECL Devices
http://onsemi.com
6
MC10E131, MC100E131
PACKAGE DIMENSIONS
PLCC-28 FN SUFFIX PLASTIC PLCC PACKAGE CASE 776-02 ISSUE E
Y BRK D Z -L- -M- B 0.007 (0.180) U
M
T L-M
M
S
N
S S
-N-
0.007 (0.180)
T L-M
N
S
W
28 1
D
V
X VIEW D-D
G1
0.010 (0.250)
S
T L-M
S
N
S
A Z R E G G1 0.010 (0.250)
S
0.007 (0.180) 0.007 (0.180)
M M
T L-M T L-M
S S
N N
S S
H
0.007 (0.180)
M
T L-M
S
N
S
C
K1 0.004 (0.100) -T- SEATING
PLANE
J
K F VIEW S 0.007 (0.180)
M
VIEW S T L-M
S
T L-M
S
N
S
N
S
NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).
DIM A B C E F G H J K R U V W X Y Z G1 K1
INCHES MIN MAX 0.485 0.495 0.485 0.495 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --- 0.025 --- 0.450 0.456 0.450 0.456 0.042 0.048 0.042 0.048 0.042 0.056 --- 0.020 2_ 10_ 0.410 0.430 0.040 ---
MILLIMETERS MIN MAX 12.32 12.57 12.32 12.57 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --- 0.64 --- 11.43 11.58 11.43 11.58 1.07 1.21 1.07 1.21 1.07 1.42 --- 0.50 2_ 10_ 10.42 10.92 1.02 ---
http://onsemi.com
7
MC10E131, MC100E131
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
8
MC10E131/D

▲Up To Search▲

Price & Availability of MC10E131FNR2

	To Download MC10E131FNR2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .